修理を始めるには コミュニティ ストア

iPad Air 2 LTE 显示组件更换

英語
中国語

ガイドの前提条件

この翻訳が完了したとみなされる前に、全ての必須条件ガイドを翻訳する必要があります。

加热iOpener

iPad Air 2 Wi-Fi 前面板拆解程序

iPad Air 2 Wi-Fi版屏幕组件的更换

iPad Air 2 Wi-Fi屏幕组件的更换

ガイド情報

= 完了 = 不完全
    Follow this guide to replace a broken front panel assembly on an iPad Air 2 LTE. The front panel or display assembly consists of the glass digitizer on top and the fused LCD underneath. In the iPad Air 2, these two parts are not separable and must be replaced as one piece.
    Note that the fingerprint scanner in the home button is paired to the iPad's logic board. In order to maintain Touch ID functionality, you must transfer your original home button to the new display assembly.
    This process can fix issues like a cracked glass digitizer, a non-responsive touchscreen, or a broken LCD screen.
    Parts of this guide were shot with a Wi-Fi model and as such the internals may look slightly different from the LTE model. The procedure is the same for both models except where noted.

      ガイドの手順

      クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。