メインコンテンツにスキップ

iMacのIntel 27インチ(Late 2009/Mid 2010) のグラフィックカードの交換

英語
日本語

手順 4を翻訳中

手順4
iMac Intel 27" (Late 2009 or Mid 2010) Graphics Card Replacement: 手順 0、 2の画像 1 iMac Intel 27" (Late 2009 or Mid 2010) Graphics Card Replacement: 手順 0、 2の画像 2
  • Remove the metal bezel from the graphics card; only a couple of screws hold it in place.

  • Store your graphics card in a safe place in case you need it again or want to reinstall it.

  • The second image shows both the 4 and 6 series side by side. A little difference in height makes some extra work necessary (see the next step).

グラフィックボードからメタル製ベゼルを取り外します。1対のネジだけで留められています。

グラフィックボードはもう一度使ったり、再装着する時のために、ケースにしまって保管してください。

2番目の画像は4シリーズと6シリーズの側面です。少し高さが違うため、次の手順では追加作業が必要です。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります