メインコンテンツにスキップ

Microsoft Surface Laptopの分解

英語
日本語

手順 5を翻訳中

手順5
Microsoft Surface Laptop Teardown: 手順 0、 3の画像 1 Microsoft Surface Laptop Teardown: 手順 0、 3の画像 2 Microsoft Surface Laptop Teardown: 手順 0、 3の画像 3
  • We have to pull out the big guns knife now, to cut off the rest of the pelt. Layered underneath we find a metal shield, the meat in our Surface sandwich.

  • With more adhesive and plastic bits holding the shield from beneath, we fire up the iOpener and get back to popping.

  • Now that we've got a clear look at the plastic, it seems these aren't reusable clips at all, but weak ultrasonic spot welds that we've been busting through. This is definitely not going back together without a roll of duct tape.

残りの毛皮を剥ぎ取るためには、より大きなナイフが必要なようです。この毛皮の下にはメタルシールドがあります。Surfaceサンドウィッチに挟まれたお肉(中身)です。

もっと多量の接着剤と底をシールドするプラスチック製のビットに応戦するため、iOpenerを点火してもう一度剥ぎ取っていきます。

さて、プラスチック製の部分がはっきりと確認できます。再利用できるクリップは全く使用されていようです。代わりに、私たちがこじ開けた超音波スポット溶接箇所が緩くなってしまいました。これはガムテープで巻かない限り、元の状態には戻せないということです。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります