メインコンテンツにスキップ

iMac Intel 21.5インチ Retina 4Kディスプレイハードドライブアセンブリの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
iMac Intel 21.5" Retina 4K Display Hard Drive Assembly Replacement: 手順 0、 3の画像 1 iMac Intel 21.5" Retina 4K Display Hard Drive Assembly Replacement: 手順 0、 3の画像 2 iMac Intel 21.5" Retina 4K Display Hard Drive Assembly Replacement: 手順 0、 3の画像 3
  • Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess.

  • The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet.

ロジックボード付近の先端からハードドライブを持ち上げ、奥からゆっくりと引き抜きます。

ハードディスクドライブはまだSATAケーブルで接続されたままです。 そのため、iMacから完全に取り外さないでください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります