メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
中国語

手順 3を翻訳中

手順3
Using your fingers, carefully pull the vertical sync cable out of its socket on the LED driver board near the top left corner of your iMac. Be sure to pull the connector parallel to the LED driver board, straight out of its socket.
  • Using your fingers, carefully pull the vertical sync cable out of its socket on the LED driver board near the top left corner of your iMac.

  • Be sure to pull the connector parallel to the LED driver board, straight out of its socket.

用手小心的将位于iMac左上角的LED驱动板上的垂直同步带状电缆从基座中拔出。

确保与LED驱动板平行地将线缆从插座中拉出。

-[* black] Using your fingers, carefully pull the vertical sync cable out of its socket on the LED driver board near the top left corner of your iMac.
+[* red] Using your fingers, carefully pull the vertical sync cable out of its socket on the LED driver board near the top left corner of your iMac.
[* icon_caution] Be sure to pull the connector parallel to the LED driver board, straight out of its socket.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります