メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
中国語

手順 2を翻訳中

手順2
In the following steps, you will separate the display panel by slicing though the adhesive bonding the display to the Pixel's chassis. For reference, the back of the display panel is shown at left. Note the narrow clearance between the side of the display unit and the OLED panel. (The bezels indicate this spacing on the front.) Inserting an opening tool deeper than 1.5 mm into the sides of the device, or 9 mm into the top and bottom can permanently damage the display.
  • In the following steps, you will separate the display panel by slicing though the adhesive bonding the display to the Pixel's chassis.

  • For reference, the back of the display panel is shown at left. Note the narrow clearance between the side of the display unit and the OLED panel. (The bezels indicate this spacing on the front.)

  • Inserting an opening tool deeper than 1.5 mm into the sides of the device, or 9 mm into the top and bottom can permanently damage the display.

接下来,我们要通过对粘合处的反复划动将显示屏从背板上分离出来。

作为参照,左图是拆开后的手机背板。注意显示单元左右侧与 OLED 面板之间的狭窄缝隙。

如果工具深入侧面 1.5 毫米以里,或是顶部和底部 9 毫米以里,将永久性地损坏显示屏。

[* icon_note] In the following steps, you will separate the display panel by slicing though the adhesive bonding the display to the Pixel's chassis.
-[* black] For reference, the back of the display panel is shown at left. Note the narrow clearance between the side of the display unit and the OLED panel.
+[* black] For reference, the back of the display panel is shown at left. Note the narrow clearance between the side of the display unit and the OLED panel. (The bezels indicate this spacing on the front.)
[* icon_caution] Inserting an opening tool deeper than 1.5 mm into the sides of the device, or 9 mm into the top and bottom can permanently damage the display.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります