メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
フランス語

手順 2を翻訳中

手順2
In the following steps, you will separate the display panel by slicing though the adhesive bonding the display to the Pixel's chassis. For reference, the back of the display panel is shown at left. Note the narrow clearance between the side of the display unit and the OLED panel. (The bezels indicate this spacing on the front.) Inserting an opening tool deeper than 1.5 mm into the sides of the device, or 9 mm into the top and bottom can permanently damage the display.
  • In the following steps, you will separate the display panel by slicing though the adhesive bonding the display to the Pixel's chassis.

  • For reference, the back of the display panel is shown at left. Note the narrow clearance between the side of the display unit and the OLED panel. (The bezels indicate this spacing on the front.)

  • Inserting an opening tool deeper than 1.5 mm into the sides of the device, or 9 mm into the top and bottom can permanently damage the display.

Au cours des étapes suivantes, vous allez décoller le panneau de l'écran en tranchant l'adhésif qui le fixe au châssis du Pixel.

Prenez vos repères sur le verso du panneau de l'écran montré à gauche. Remarquez l'espace étroit entre l'écran et le panneau OLED.

Si vous insérez un outil d'ouverture au-delà de 1,5 mm sur les bords de l'appareil ou de plus de 9 mm en haut et en bas, vous risquez d'endommager l'écran de façon irréversible.

[* icon_note] In the following steps, you will separate the display panel by slicing though the adhesive bonding the display to the Pixel's chassis.
-[* black] For reference, the back of the display panel is shown at left. Note the narrow clearance between the side of the display unit and the OLED panel.
+[* black] For reference, the back of the display panel is shown at left. Note the narrow clearance between the side of the display unit and the OLED panel. (The bezels indicate this spacing on the front.)
[* icon_caution] Inserting an opening tool deeper than 1.5 mm into the sides of the device, or 9 mm into the top and bottom can permanently damage the display.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります