メインコンテンツにスキップ

iPad 3 4G SIM ボードの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 2を翻訳中

手順2
iPad 3 4G SIM Board Replacement: 手順 0、 1の画像 1
  • Holding the headphone jack assembly cable out of the way, remove the SIM board from the iPad.

  • As you pull the headphone jack assembly cable out of the way, be careful not to pull too hard against the headphone jack, as you may tear it off.

作業の邪魔にならないようにヘッドホンジャックアセンブリケーブルを手で持ちながら、SIMボードをiPadから外します。

ヘッドホンジャックアセンブリケーブルを手で持つ間、強く引っ張らないようにご注意ください。切断してしまう可能性があります。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります