メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Lift the display data cable slightly for enough clearance to remove the two Phillips screws securing the DC-In board to the upper case. Lift the DC-In board slightly and pull its connector straight away from the socket on the logic board.
  • Lift the display data cable slightly for enough clearance to remove the two Phillips screws securing the DC-In board to the upper case.

  • Lift the DC-In board slightly and pull its connector straight away from the socket on the logic board.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります