修理を始めるには コミュニティ ストア

西铁城 Ecodrive 表 电池更换

ガイドに戻る
英語
中国語
前の手順 次の手順

手順 5を翻訳中

手順5
Citizen Ecodrive Watch Battery Replacement: 手順 0、 1の画像 1

  • For a pry-off type of watch back: to close the back, use a watch press. (The watch press tool and a set of dies costs about $15.)

  • Pick one of the dies that just fits the outer edge of the bezel for the front side, and pick another one that just fits the outer edge of the back casing. Attach the die for the back on the top (the lever of the watch press) and the die for the face on the bottom (the base of the watch press).

  • Place the watch face down. Arrange the seal (if any), and put the watch back gently into position.

  • Squeeze the tool slowly and firmly until you hear it click into place. Some watches do not click, so check the progress as you squeeze.

对于撬开式表背，要关闭表背，请使用表压机。（表压工具和一套模具的价格约为 15 美元。）

挑选一个刚好适合表圈外缘的模具，制作表壳正面，再挑选一个刚好适合表壳后盖外缘的模具。将表壳模具安装在顶部（手表压机的杠杆），将表盘模具安装在底部（手表压机的底座）。

将手表正面朝下。整理密封件（如果有），然后轻轻将手表放回原位。

慢慢用力挤压工具，直到听到其卡入到位的声音。有些手表没有发出咔嗒声，因此挤压时要检查进度。

-[* black] For a pry-off type of watch back, to close the back, use a watch press. (The watch press tool and a set of dies costs about $15.)
+[* black] For a ***pry-off*** type of watch back: to close the back, use a watch press. (The watch press tool and a set of dies costs about $15.)
[* black] Pick one of the dies that just fits the outer edge of the bezel for the front side, and pick another one that just fits the outer edge of the back casing. Attach the die for the back on the top (the lever of the watch press) and the die for the face on the bottom (the base of the watch press).
[* black] Place the watch face down. Arrange the seal (if any), and put the watch back gently into position.
[* black] Squeeze the tool slowly and firmly until you hear it click into place. Some watches do not click, so check the progress as you squeeze.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。