ご注意：あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。
手順 2を翻訳中
手順2
-
Remove the following screws:
-
One 1.4 mm Phillips screw
-
Three 2.2 mm standoff screws
-
In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.
| [* black] Remove the following screws: | |
| [* red] One 1.4 mm Phillips screw | |
| [* orange] Three 2.2 mm standoff screws | |
| - | [* icon_note] Standoff screws are best removed using |
| + | [* icon_note] Standoff screws are best removed using a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit. |
| [* black] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。