How to set up your Strive AL 6.0 Race

英語

日本語

手順 7を翻訳中

手順7

Slide the axle in with the quick-release lever opened. As soon as the axle thread engages with the thread of the opposite side, close it by turning clockwise.
In its end position the quick-release lever should be tight so that it can no longer be turned.
The best closing position is in nearly upright position in front of the lower fork leg. If the lever cannot be closed completely in the correct position (or is too loose), unscrew it, take it out and re-align the axle by pushing down the lever part and turning it against the shaft.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。