手順 5を翻訳中
手順5
-
Loosen all screws of the hangers along the frame which hold the saddle cable.
-
Bring the front end with the switch to the bar by pulling it through the hangers along the frame. Take care of the other cables around your bar.
-
Position the lever on the right side of your bar and tighten it's screw loosely. Bring it into a comfortable position for your riding stance and tighten its bolt with the torque wrench to 5-6 Nm.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。