修理を始めるには コミュニティ ストア

Aufbau deines Strive AL 6.0 Race

ガイドに戻る
英語
ドイツ語
前の手順 次の手順

手順 2を翻訳中

手順2
How to set up your Strive AL 6.0 Race, Bar montage: 手順 0、 3の画像 1 How to set up your Strive AL 6.0 Race, Bar montage: 手順 0、 3の画像 2 How to set up your Strive AL 6.0 Race, Bar montage: 手順 0、 3の画像 3
Bar montage

  • Loosen the bolts of the stem with the torque wrench and remove its faceplate completely.

  • Take a bit of the assembly paste and apply a thin layer of it on the inner side of the faceplate as well as in the clamping area of the stem body.

Lenker Montage

Der erste Schritt um deinen Lenker zu montieren ist, alle vorne liegenden Schrauben des Vorbaus und anschließend seine Frontplatte komplett zu entfernen.

Verwende anschließend etwas von der Montagepaste und trage eine dünne Schicht auf die Flächen des Vorbaus auf, welche sich später in Kontakt mit deinem Lenker befinden.

[title] Bar montage
-[* black] The very first step to mount the bar is to loosen the bolts of the stem with the torque wrench and to remove its faceplate completely.
-[* black] After that take a bit of the assembly paste and apply a thin layer of it on the inner side of the faceplate as well as in the clamping area of the stem body.
+[* black] Loosen the bolts of the stem with the torque wrench and remove its faceplate completely.
+[* black] Take a bit of the assembly paste and apply a thin layer of it on the inner side of the faceplate as well as in the clamping area of the stem body.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。