メインコンテンツにスキップ

Insignia Flex 10.1 NS-P10A6100 Back Case Replacement

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
Insignia Flex 10.1 NS-P10A6100 Back Case Replacement: 手順 0、 1の画像 1
  • Make sure your tablet is turned off and not connected to a power source to prevent personal injury.

  • The volume rocker and power button located on the top edge by the camera are not connected pieces and will become free from the device once the front panel is removed from the back case. They are easily put back in place when reassembling the tablet.

  • Position the tablet with the top edge by the camera facing down.

  • Insert the plastic opening tool between the front panel and back case at the upper left hand corner of the tablet.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります