Axa Security Greenline bicycle lamp disassembly

手順1

To open the lamp housing, you first have to remove the black cover at the front. This is the part that covers the screws that you have to get at first. Unfortunately, it is glued in some places. It is best to use a sturdy plastic tool so that the plastic does not break (as it did with me).

手順2

Remove the four screws that hold the lens to the LED heatsink

手順3

This shows the four screws that hold the plastic back cover to the center metal frame. Remove them as well.

手順4

The black one should be soldered to "GND"