修理を始めるには コミュニティ ストア

MacBook Pro 13" Function Keys Late 2016 분해도

ガイドに戻る
英語
韓国語
前の手順 次の手順

手順 7を翻訳中

手順7
MacBook Pro 13" Function Keys Late 2016 Teardown: 手順 0、 3の画像 1 MacBook Pro 13" Function Keys Late 2016 Teardown: 手順 0、 3の画像 2 MacBook Pro 13" Function Keys Late 2016 Teardown: 手順 0、 3の画像 3

  • Following our intuition, we try for the trackpad next, and are pleasantly surprised at the ease of its removal.

  • This represents a huge improvement over the previous 13" MacBook Pro, where the trackpad was trapped under the battery.

  • We find some familiar digital hardware piggybacking on the trackpad:

  • STMicroelectronics STM32F103VB ARM Cortex-M3 MCU

  • Broadcom BCM5976C1KUFBG Touch Controller

  • Bosch Sensortec BMA282 accelerometer

  • Texas Instruments TMP421 remote/local temperature sensor

  • We also find the Taptic Engine, AKA the magic electromagnet behind Force Touch, to be simply secured with screws and spring contacts.

우리 직감에 따라서, 다음으로 트랙패드를 공략하고, 예상했던 것보다 쉽게 분리할 수 있다는 사실에 놀랐습니다.

이는 트랙 패드가 배터리 아래에 갇혀 있던 이전 13” MacBook Pro 보다 크게 개선한 것입니다.

트랙패드에 업혀 있는 익숙한 디지털 하드웨어를 발견합니다:

ST Microelectronics STM32F103VB ARM Cortex-M3 MCU

Broadcom BCM5976C1KUFBG Touch Controller

우리는 또한 Taptic Engine/탭틱 엔진이 (AKA Force Touch 뒤에 위치한 전자석) 나사와 스프링 접점으로 간단하게 고정한 것을 발견합니다.

[* black] Following our intuition, we try for the trackpad next, and are pleasantly surprised at the ease of its removal.
[* black] This represents a huge improvement over the previous 13" MacBook Pro, where the trackpad was [guide|38300|trapped under the battery|stepid=86941|new_window=true].
[* icon_note] We find some [guide|39841|familiar|stepid=89866|new_window=true] digital hardware piggybacking on the trackpad:
- [* red] ST Microelectronics [http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103vb.html|STM32F103VB|new_window=true] ARM Cortex-M3 MCU
+ [* red] STMicroelectronics [http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103vb.html|STM32F103VB|new_window=true] ARM Cortex-M3 MCU
[* orange] Broadcom BCM5976C1KUFBG Touch Controller
+ [* yellow] Bosch Sensortec BMA282 accelerometer
+ [* green] Texas Instruments [link|https://www.ti.com/product/TMP421|TMP421|new_window=true] remote/local temperature sensor
[* black] We ''also'' find the Taptic Engine, AKA the ~~magic~~ electromagnet behind Force Touch, to be simply secured with screws and spring contacts.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。