注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。
手順 1を翻訳中
手順1
-
Unscrew the two 3mm Phillips #1 head screws along the top edge of the device.
- | [* red] Unscrew the two 3mm Phillips |
---|---|
+ | [* red] Unscrew the two 3mm Phillips #1 head screws along the top edge of the device. |
[* icon_caution] The screws on the back panel strip easily. Go slowly and press down firmly. | |
[* icon_note] The screws on the back panel are held in by locking washers, so they won't come out of the back panel. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。