メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての20個のガイドに反映されます。

英語
日本語

手順 1を翻訳中

手順1
Remove four tri-point Y000 screws securing the lower connector bracket, of the following lengths:
  • Remove four tri-point Y000 screws securing the lower connector bracket, of the following lengths:

  • Three 1.2 mm screws

  • One 2.4 mm screw

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

コネクターブラケット下部から次のトライポイント Y000 ネジを取り外します。

1.2 mmネジー3本

2.4 mmネジー1本

[* black] Remove the following tri-pointfour tri-point Y000 screws fromsecuring the lower connector bracketbracket, of the following lengths:
[* black] Remove the following tri-pointfour tri-point Y000 screws fromsecuring the lower connector bracketbracket, of the following lengths:
[* red] Three 1.2 mm screws
[* orange] One 2.4 mm screw
[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your iPhone.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります