メインコンテンツにスキップ
英語
日本語

手順 13を翻訳中

手順13
Each speaker is attached by one screw and one connector cable. Only the right speaker needs to be removed to gain access to the logic board, but we removed them both. The Bluetooth board is the blue board in the top center.
  • Each speaker is attached by one screw and one connector cable.

  • Only the right speaker needs to be removed to gain access to the logic board, but we removed them both.

  • The Bluetooth board is the blue board in the top center.

  • The 802.11n card is on the right with two antenna wires running to it from below the logic board.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります