メインコンテンツにスキップ

Mac mini Mid 2011 Netzteil Austausch

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての7個のガイドに反映されます。

英語
ドイツ語

手順 2を翻訳中

手順2
Mac mini Mid 2011 Power Supply Replacement: 手順 0、 3の画像 1 Mac mini Mid 2011 Power Supply Replacement: 手順 0、 3の画像 2 Mac mini Mid 2011 Power Supply Replacement: 手順 0、 3の画像 3
  • Pull the silver metal AC-In socket retainer away from the side of the outer case and remove it from the mini.

  • During reassembly, notice that the silver clip hugs either side of the lower beveled edge of the AC connector. When sliding the clip back in it will hit a stop, but not click into place. You will know that you did it correctly because it will not easily move out of position.

Ziehe die silbermetallische Halteklammer des Netzanschlusssockels von der Seite des Gehäuses weg und entferne sie vom Mini.

Achte beim Zusammenbau darauf, dass dieser Halter beide Seiten der abgeschrägten Kante des Netzanschlusses umfasst. Wenn du ihn einschiebts wirst du einen Widerstand spüren, aber kein Klick. Daran merkst du, dass er richtig sitzt, er lässt sich dann nur schwer bewegen.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります