メインコンテンツにスキップ

iMac Intel 21.5インチ Retina 4Kディスプレイロジックボードアセンブリの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 8を翻訳中

手順8
iMac Intel 21.5" Retina 4K Display Logic Board Assembly Replacement: 手順 0、 3の画像 1 iMac Intel 21.5" Retina 4K Display Logic Board Assembly Replacement: 手順 0、 3の画像 2 iMac Intel 21.5" Retina 4K Display Logic Board Assembly Replacement: 手順 0、 3の画像 3
  • Use the flat edge of a spudger to pry the headphone jack cable connector from its socket on the logic board.

  • Push the cable slightly to the right.

スパッジャーのフラットエンドを使って、ヘッドホンジャックケーブルのコネクタをロジックボード上のソケットから引き抜きます。

ケーブルを若干右側に押し込みます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります