メインコンテンツにスキップ

iPad Air LTE Logic Board tauschen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
ドイツ語

手順 20を翻訳中

手順20
iPad Air LTE Logic Board Replacement: 手順 0、 2の画像 1 iPad Air LTE Logic Board Replacement: 手順 0、 2の画像 2
  • Continue peeling up the tape away until there is enough slack in the left speaker cable to disconnect it.

  • Do not completely remove the tape—it will be easier to replace if you leave a section still attached to the rear case.

Ziehe das Klebeband soweit ab, bis genug Spiel im linken Lautsprecherkabel ist, dass du den Stecker ablösen kannst.

Entferne das Klebeband nicht ganz - es lässt sich wieder leichter einbauen, wenn es noch teilweise am Rückgehäuse festgeklebt ist.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります