BCG800XL Grinder Jamming due to Worn Impeller

ガイドに戻る

英語

日本語

前の手順次の手順

手順 16を翻訳中

手順16

BCG800XL Grinder Jamming due to Worn Impeller, Put the top back on and screw it back in: 手順 0、 2の画像 1

BCG800XL Grinder Jamming due to Worn Impeller, Put the top back on and screw it back in: 手順 0、 2の画像 2

Put the top back on and screw it back in

Put the plastic top back on.
Flip the grinder over and use the long Phillips #2 screwdriver to reinstall the 4 screws that hold the top in place.
If the screwdriver is not already magnetized, it'll be worth rubbing a magnet on it to do so prior to this step.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。