BCG800XL Grinder Jamming due to Worn Impeller

英語

日本語

手順 1を翻訳中

手順1

Inspect your grinder impeller

Unplug your grinder before completing this repair to avoid electric shock.
Remove the hopper and take the upper burrs out. Empty out any coffee grounds (An air gun or vacuum helps) and then inspect the impeller blades.
If the impeller can fit through the hole (ie: be removed just by taking out the lower burr) then it definitely needs replacement.
A good impeller should not be removable without dis-assembly and the tips of the impeller blades should not be visible.
If your impeller is made of stainless steel rather than plastic you likely have a newer model with significant design changes (eg: BCG820). Stainless steel should not wear out and so your problem is elsewhere.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。