メインコンテンツにスキップ

ディスプレイ表面のテーピング

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
Taping Over The Display, Tape over the display: 手順 0、 3の画像 1 Taping Over The Display, Tape over the display: 手順 0、 3の画像 2 Taping Over The Display, Tape over the display: 手順 0、 3の画像 3
Tape over the display
  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping over the glass.

  • Lay overlapping strips of clear packing tape over the iPhone's display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Wear safety glasses to protect your eyes from any glass shaken free during the repair.

  • If the broken glass makes it difficult to get a suction cup to stick in the next few steps, try folding a strong piece of tape (such as duct tape) into a handle and lifting the display with that instead.

ディスプレイのガラスにひびが入っている場合は、作業中ひびが拡大し、怪我をしないようにガラス表面をテーピングします。

透明の梱包用テープをiPhoneのディスプレイ全体に二重にして貼ってください。

この作業によってガラスの破片が飛び散らないよう固定され、ディスプレイを持ち上げたりこじ開けたりする際に構造を保ってくれます。

修理中、ガラスが飛び散ることもあります。保護メガネを装着してください。

このあとの手順で吸盤カップを装着することができないほどガラスが壊れてしまっている場合は、さらに強力なテープ(ダクトテープなど)を折り曲げて取手を作り、ディスプレイを引っ張って持ち上げます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります