メインコンテンツにスキップ

iMac Intel 21.5インチ EMC 2389のディスプレイの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての28個のガイドに反映されます。

英語
日本語

手順 4を翻訳中

手順4
iMac Intel 21.5" EMC 2389 Display Replacement: 手順 0、 2の画像 1 iMac Intel 21.5" EMC 2389 Display Replacement: 手順 0、 2の画像 2
  • Rotate the display out of the outer case enough to disconnect the LED backlight power cable from the LED driver board.

  • Disconnect the LED backlight power cable by depressing the locking mechanism while pulling the connector away from its socket (toward the bottom edge of the iMac).

LEDドライバーボードからLEDバックライトのパワーケーブルの接続が外れるように、アウターケースからディスプレイを回転させます。

ロック機構のソケットからコネクタを引き抜きながら( iMacの下側端に向けて)、ロック機構を押し込んで、LEDバックライトパワーケーブルの接続を外します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります