iPad 2 GSM Battery Replacement

ご注意：あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

ガイドに戻る

英語

オランダ語

手順 1を翻訳中

手順1

iPad 2 GSM Battery Replacement: 手順 0、 3の画像 1

iPad 2 GSM Battery Replacement: 手順 0、 3の画像 2

iPad 2 GSM Battery Replacement: 手順 0、 3の画像 3

Reheat the iOpener in the microwave for one minute.
Remember to be careful not to overheat the iOpener during the repair procedure. Wait at least two minutes before reheating the iOpener, and never microwave it for more than one minute.
Place the heated iOpener on the back of the iPad just right of center (the side opposite the rear facing camera). Let it sit there for 90 seconds to soften the battery adhesive.
Move the iOpener to the center of the back of the iPad and let the iOpener sit for another 90 seconds.
If the iOpener cools significantly between sittings, reheat it for another minute.
Move the iOpener to the left edge (the side with the rear facing camera) of the back of the iPad and let the iOpener sit for another 90 seconds.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。