メインコンテンツにスキップ

Swagway Teardown

英語
オランダ語

手順 6を翻訳中

手順6
Swagway Teardown: 手順 0、 2の画像 1 Swagway Teardown: 手順 0、 2の画像 2
  • The motor power lines have some interesting (read: completely mismatched) color coordination going on—fixers take note.

  • They could also do with some more support and insulation (hot glue) on the solder joints.

  • Here's what we found on a quick tour of the main board:

  • GigaDevice GD32F103 ARM Cortex-M3

  • Six half-H bridge motor drivers, made up of two large MOSFETs each

  • Changjiang Electronics Technology Co., LTD CJ78M05 0.5A/5V voltage regulator

  • Two pairs of 0.007 ohm resistors by the power inlet (R007).

  • Resistors like these, with very low resistance, are used to sense current—helping to shut things down if a motor stalls out.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります