Asus ZenFone 2の分解

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語

日本語

手順 2を翻訳中

手順2

Remove the Inner Cover Screws

Remove the thirteen black screws and the single silver screw from the back of the phone with a JIS size 00 screwdriver.
The black screws are 2.8 mm in length.
The silver screw is 5.5 mm in length.
The black screw next to the camera and the flash is covered by a sticker. This screw can be easily removed as if there were no sticker on top of it. The point of the screwdriver should be able to pierce through the sticker easily.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。