手順 5を翻訳中
手順5
Remove the wings
-
The left and right sides hinge up then tip out away from the device. No screws, just two pegs per side.
-
3x phillips 00 screws hold the main board on.
-
2x phillips 00 screws hold the L + R buttons and scroll wheel assembly.
-
The laser eye board seems to be soldered to main board and is not removable.
-
2x torx T6 screws hold the lens to the main board. Unless you need to clean this, there is no need to remove these screws.
-
To re-assemble the wings, drop the front onto the front peg then "hinge" down onto the back peg.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。