メインコンテンツにスキップ

ディスプレイ上のテーピング

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
Taping Over The Display: 手順 0、 3の画像 1 Taping Over The Display: 手順 0、 3の画像 2 Taping Over The Display: 手順 0、 3の画像 3
  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping over the glass.

  • Lay overlapping strips of clear packing tape over the iPhone's display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Wear safety glasses to protect your eyes from any glass shaken free during the repair.

  • If the broken glass makes it difficult to get a suction cup to stick in the next few steps, try folding a strong piece of tape (such as duct tape) into a handle and lifting the display with that instead.

ディスプレイのガラスが割れている場合、作業中さらにダメージが広がったり、作業中、怪我をしないようガラスの表面にテープを貼ります。

透明な粘着テープをiPhoneディスプレイ表面上に二重に装着します。

この手順によってディスプレイを持ち上げた際に、ガラスが飛び散ったりすることなく、構造を保つことができます。

作業中、ガラスが飛び散ることがあるため、保護メガネを着用してください。

次のひび割れたガラスのため、次の手順で吸盤カップを引き上げれない場合は、ダクトテープのような強力な粘着テープを使ってハンドルを作り引き上げてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります