iMac Intel 21.5" EMC 2428 Teardown

ガイドに戻る

英語

日本語

前の手順次の手順

手順 7を翻訳中

手順7

iMac Intel 21.5" EMC 2428 Teardown: 手順 0、 3の画像 1

iMac Intel 21.5" EMC 2428 Teardown: 手順 0、 3の画像 2

iMac Intel 21.5" EMC 2428 Teardown: 手順 0、 3の画像 3

In the next few steps, we remove many components that are very similar to the last 21.5" iMac.
The WD Caviar Blue hard drive is held to the front bezel by a few screws and, as always, the SATA data/power connectors.
The WD Caviar Blue drive is a non-standard SATA drive. The power connector features 7 pins, rather than the standard 4. The drive also has non-standard firmware. This means you can only use Apple's own hard drives and not any standard after-market SATA drive.
Removing the power supply requires disconnecting the AC inlet cable from the logic board.
The LED driver board comes out next after successfully removing the power supply.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。