メインコンテンツにスキップ

iPhone 6s Plus のLightningコネクタとヘッドフォンジャックの交換

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
日本語

手順 4を翻訳中

手順4
iPhone 6s Plus Lightning Connector and Headphone Jack Replacement: 手順 0、 2の画像 1 iPhone 6s Plus Lightning Connector and Headphone Jack Replacement: 手順 0、 2の画像 2
  • Remove the following five Phillips screws:

  • One 2.9 mm screw

  • One 1.9 mm screw

  • One 1.5 mm screw

  • One 1.6 mm screw

  • One 1.3 mm screw set in the bottom edge of the rear case

次のプラスネジを合計5本取り外します。

2.9 mmネジー1本

1.9 mmネジー1本

1.5 mmネジー1本

1.6 mmネジー1本

背面ケースの下部端に留められた1.3 mmネジー1本

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります