メインコンテンツにスキップ

Remplacement de la carte PCB de la carte SD/carte SIM du Motorola Droid Pro

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
フランス語

手順 2を翻訳中

手順2
Motorola Droid Pro SD Card/SIM Card PCB Board Replacement: 手順 0、 3の画像 1 Motorola Droid Pro SD Card/SIM Card PCB Board Replacement: 手順 0、 3の画像 2 Motorola Droid Pro SD Card/SIM Card PCB Board Replacement: 手順 0、 3の画像 3
  • Use a plastic opening tool to open the phone along the sides between the front panel and the chrome trim.

  • It is held together by small clips that lock in. You may have to use extra force to unlock them.

  • Go around on all sides of the phone, unlocking the clips. Then pull the back panel off.

Utilisez un outil d'ouverture en plastique pour ouvrir le téléphone le long des côtés entre le panneau avant et la garniture chromée.

Il est maintenu par de petits clips qui se verrouillent. Vous devrez peut-être utiliser une force supplémentaire pour les déverrouiller.

Faites le tour de tous les côtés du téléphone en déverrouillant les clips. Retirez ensuite le panneau arrière.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります