修理を始めるには コミュニティ ストア

Installazione Unità Ottica nel MacBook Core 2 Duo

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての22個のガイドに反映されます。

ガイドに戻る
英語
イタリア語
前の手順 次の手順

手順 6を翻訳中

手順6
MacBook Core 2 Duo Optical Drive Replacement: 手順 0、 1の画像 1

  • Peel up the foil tape between the fan and the optical drive. Lift the foil tape from the fan side, leaving it attached to the optical drive.

  • During reassembly, be sure to route the cables beneath the tape before reattaching it.

  • If the adhesive on this foil tape no longer sticks, you can hold it in place using a regular piece of tape, but don't block the fan intake.

Stacca il nastro alluminato tra la ventola e il disco ottico. Solleva il nastro dal lato della ventola, lasciandolo attaccato al disco ottico.

In fase di rimontaggio, assicurati di allineare i cavi sotto il nastro prima di riattaccarlo.

[* black] Peel up the foil tape between the fan and the optical drive. Lift the foil tape from the fan side, leaving it attached to the optical drive.
[* black] During reassembly, be sure to route the cables beneath the tape before reattaching it.
+[* icon_note] If the adhesive on this foil tape no longer sticks, you can hold it in place using a regular piece of tape, but don't block the fan intake.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。