メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
イタリア語

手順 18を翻訳中

手順18
Tip the logic board up to a vertical position to expose the single antenna connector on the underside, near the top edge of the board. Do not attempt to fully remove the logic board yet, as the Wi-Fi/Bluetooth antenna is still connected to the underside of the board. Do not attempt to fully remove the logic board yet, as the Wi-Fi/Bluetooth antenna is still connected to the underside of the board.
  • Tip the logic board up to a vertical position to expose the single antenna connector on the underside, near the top edge of the board.

  • Do not attempt to fully remove the logic board yet, as the Wi-Fi/Bluetooth antenna is still connected to the underside of the board.

Inclina la scheda logica fino alla posizione verticale per accedere al singolo connettore di antenna sottostante, vicino al bordo superiore della scheda.

Non cercare ancora di rimuovere completamente la scheda logica, perché l'antenna Wi-Fi/Bluetooth è ancora connessa alla parte inferiore della scheda stessa.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります