メインコンテンツにスキップ

Nintendo DS Liteの下部ケースの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 4を翻訳中

手順4
Nintendo DS Lite Lower Case Replacement: 手順 0、 1の画像 1
  • Lift the lower case away from the rest of the DS Lite.

  • Pull carefully. Some units are sealed with adhesive, and pulling too hard can damage the power switch.

  • When re-assembling, make sure that power switch and volume sliders are properly aligned with the switches on the motherboard.

DS Lite本体から下部ケースを持ち上げて外します。

注意深く引っ張ってください。いくつかのユニットは接着テープで封がされていて、強く引っ張りすぎると電源スイッチを損傷させる恐れがあります。

再組み立ての際、電源スイッチと音量スライダーがマザーボード上のスイッチと正しく位置が合っていることを確認してください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります