メインコンテンツにスキップ

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 2を翻訳中

手順2
Once the rear glass is hot to the touch, apply a suction cup near the bottom edge  of the glass. Lift on the suction cup to create a small gap underneath the rear glass, and insert an opening pick into the gap. Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap to help weaken the adhesive in the following steps.
  • Once the rear glass is hot to the touch, apply a suction cup near the bottom edge of the glass.

  • Lift on the suction cup to create a small gap underneath the rear glass, and insert an opening pick into the gap.

  • Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap to help weaken the adhesive in the following steps.

頑丈な吸盤カップを背面ガラスパネルの下半分に取り付けます。

吸盤カップをしっかり留めて蝶番のハンドルを上に上げて吸盤カップをしっかりと留めます。両方のハンドルを持ち手にするため片方のハンドルも上げます。

[* black] AttachOnce the rear glass is hot to the touch, apply a heavy-duty suction cup tonear the lower half ofbottom edge of the rear glass panelglass.
[* black] SecureLift on the suction cup by raisingto create a small gap underneath the hinged handlerear glass, and flippinginsert an opening pick into the latchgap.
[* icon_note] Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap
to clamp both handleshelp weaken the adhesive in placethe following steps.
[* black] AttachOnce the rear glass is hot to the touch, apply a heavy-duty suction cup tonear the lower half ofbottom edge of the rear glass panelglass.
[* black] SecureLift on the suction cup by raisingto create a small gap underneath the hinged handlerear glass, and flippinginsert an opening pick into the latchgap.
[* icon_note] Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap
to clamp both handleshelp weaken the adhesive in placethe following steps.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります