メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての16個のガイドに反映されます。

英語
中国語

手順 3を翻訳中

手順3
Insert the edge of a spudger in between the lower and upper case near the top right corner of the DS Lite. Carefully run the spudger along the right edge of the DS Lite, creating an opening in the process. Continue running the spudger along the backside of the DS Lite until the majority of the lower case has been separated from the upper case.
  • Insert the edge of a spudger in between the lower and upper case near the top right corner of the DS Lite.

  • Carefully run the spudger along the right edge of the DS Lite, creating an opening in the process.

  • Continue running the spudger along the backside of the DS Lite until the majority of the lower case has been separated from the upper case.

将撬棒的边缘插入DS Lite顶部右端前盖与背盖之间的缝隙中。

小心翼翼的将撬棒沿着DS Lite的右边缘移动,制造出一条间隙。

持续沿着DS Lite的下端移动撬棒,直到背盖大体上与前盖分离。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります