メインコンテンツにスキップ

iPad Air 2 Wi-Fi版屏幕组件的更换

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
中国語

手順 9を翻訳中

手順9
iPad Air 2 Wi-Fi Home Button Assembly Replacement: 手順 0、 3の画像 1 iPad Air 2 Wi-Fi Home Button Assembly Replacement: 手順 0、 3の画像 2 iPad Air 2 Wi-Fi Home Button Assembly Replacement: 手順 0、 3の画像 3
  • In the following steps, you will be separating the home button gasket from the iPad's front panel. This gasket is extremely delicate and can tear easily. If the gasket does not separate easily from the front panel, reapply heat using the iOpener before continuing.

  • Use the pointed end of a spudger to gently pry the Home Button assembly up from the display.

在接下来几步中,您将要从您的iPad前面板中分离Home键垫圈。 这个垫圈十分细小,也特别容易被撕裂。 如果垫圈不能够从前面板上分离,请使用iOpener来重新加热。

使用撬棒尖端来轻轻地从显示屏上撬起Home键组件。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります