メインコンテンツにスキップ

Retina MacBook 2015 Gehäuseunterteil öffnen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての12個のガイドに反映されます。

英語
ドイツ語

手順 17を翻訳中

手順17
Retina MacBook 2015 Opening Lower Case Assembly: 手順 0、 1の画像 1
  • Disconnect the audio jack board ribbon cable by pulling it straight back out of the ZIF connector.

  • During reassembly, orient the ribbon cable so that the side with the white stripe faces you, as shown.

Löse das Flachbandkabel zur Platine der Kopfhörerbuchse, indem du es gerade aus dem ZIF Verbinder nach hinten ziehst.

Richte das Flachbandkabel beim Zusammenbau so wie gezeigt aus, sodass die Seite mit den weißen Streifen zu dir zeigt.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります