Retina MacBook 2015 Opening Lower Case Assembly

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての12個のガイドに反映されます。

ガイドに戻る

英語

韓国語

前の手順次の手順

手順 2を翻訳中

手順2

Retina MacBook 2015 Opening Lower Case Assembly: 手順 0、 3の画像 1

Retina MacBook 2015 Opening Lower Case Assembly: 手順 0、 3の画像 2

Retina MacBook 2015 Opening Lower Case Assembly: 手順 0、 3の画像 3

Wedge your fingers between the upper case and the lower case, starting from the rear of the MacBook between the hinges.
Lift the lower case only slightly to avoid damaging the cables that connect the lower case to the upper case.
Keeping a firm grip, lift steadily until the lower case separates slightly from the upper case.
You may experience a lot of resistance when lifting the lower case. If necessary, slide an opening pick or other ESD-safe pry tool down the side edges of the lower case to pop the two hidden retaining clips free.
During reassembly, to re-engage the clips, press firmly near both side edges of the lower case (near where the pick is inserted in the third image) until you hear the clips snap into place.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。