メインコンテンツにスキップ

Procedimiento de Apertura del iPad Air 2 Wi-Fi

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての18個のガイドに反映されます。

英語
スペイン語

手順 28を翻訳中

手順28
iPad Air 2 Wi-Fi  Opening Procedure, Battery connector information: 手順 0、 3の画像 1 iPad Air 2 Wi-Fi  Opening Procedure, Battery connector information: 手順 0、 3の画像 2 iPad Air 2 Wi-Fi  Opening Procedure, Battery connector information: 手順 0、 3の画像 3
Battery connector information
  • These photos show what the battery connector looks like underneath the logic board. Use these photos as a reference while you safely disconnect the battery.

  • Notice that the battery connector has springs on the logic board that press down against the battery contact pads. You'll need to slide something thin and flexible between the contact points to disconnect the battery.

Estas fotos muestran cómo se ve el conector de la batería debajo de la placa lógica. Usa estas fotos como referencia mientras desconectas la batería de manera segura.

Observa que el conector de la batería tiene resortes en la placa lógica que presionan las almohadillas de contacto de la batería. Deberás deslizar algo delgado y flexible entre los puntos de contacto para desconectar la batería.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります