メインコンテンツにスキップ

Procedimiento de Apertura del iPad Air 2 Wi-Fi

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての18個のガイドに反映されます。

英語
スペイン語

手順 24を翻訳中

手順24
iPad Air 2 Wi-Fi  Opening Procedure: 手順 0、 3の画像 1 iPad Air 2 Wi-Fi  Opening Procedure: 手順 0、 3の画像 2 iPad Air 2 Wi-Fi  Opening Procedure: 手順 0、 3の画像 3
  • Slide the left-hand opening pick along the bottom edge of the display, then remove it from the bottom right corner of the iPad.

  • Be very careful to not insert the pick more than 2 mm below home button to avoid damaging the button.

  • Be very careful to not insert the pick more than a quarter inch (6 mm) into either side of the home button to avoid damaging the display cables underneath.

Desliza la púa de apertura izquierda a lo largo del borde inferior de la pantalla, luego quítala de la esquina derecha inferior del iPad.

Ten mucho cuidado de no insertar la púa más de 2 mm por debajo del botón de inicio para evitar dañar el botón.

Ten mucho cuidado de no insertar la púa más de un cuarto de pulgada (6 mm) dentro de la pantalla para evitar dañar el Botón de inicio y los cables de la pantalla que están debajo.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります