Skip to main content
英語
日本語

手順 7を翻訳中

手順7
Attach the red lead first, followed by the white lead, and finish with the black lead.
  • Attach the red lead first, followed by the white lead, and finish with the black lead.

  • Place the wire from the new battery onto the new solder bead.

  • Press the tip of the soldering iron onto the solder bead until it melts.

  • Slide the wire lead into the liquid solder until it is in the center of the bead, then remove the soldering iron.

  • Continue with the other two connections the same way, taking special care not to solder two of the connectors together.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります