iPhone 1st Generation Battery Replacement

英語

韓国語

手順 5を翻訳中

手順5

We recommend that you clean the exposed surface of the board with a soft cloth or sponge and a small amount of rubbing alcohol.
Melt a small solder bead directly onto the metal connector on the board by placing the soldering iron onto the metal connector and then pressing solder against the tip and the board.
Once a small amount of solder has melted onto the board, lift the solder away first and then the soldering iron.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。