メインコンテンツにスキップ

Sostituzione Vetro Posteriore del Samsung Galaxy S6

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての25個のガイドに反映されます。

英語
イタリア語

手順 1を翻訳中

手順1
Samsung Galaxy S6 Rear Glass Replacement: 手順 0、 2の画像 1 Samsung Galaxy S6 Rear Glass Replacement: 手順 0、 2の画像 2
  • Opening your phone will compromise its waterproof seals. Have replacement adhesive ready before you proceed, or take care to avoid liquid exposure if you reassemble your phone without replacing the adhesive.

  • If your glass is shattered, put packing tape over the entire panel to hold it together during the removal process.

  • Lay the heated iOpener over the rear panel for about two minutes to loosen the adhesive around the edge of the glass.

  • You may need to reheat and reapply the iOpener several times to get the phone warm enough. Follow the iOpener instructions to avoid overheating.

  • Shift the iOpener to heat the remaining section of the panel for another two minutes.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the OLED display and internal battery are both susceptible to heat damage.

L'apertura del telefono comprometterà le tenute impermeabili. Prima di procedere devi avere dell'adesivo sostitutivo oppure, se non intendi sostituire l'adesivo stesso, dovrei avere cura di evitare l'esposizione a infiltrazioni di liquidi.

Se il tuo vetro è in frantumi, metti del nastro adesivo da pacchi sull'intero pannello per tenerlo insieme durante l'operazione di rimozione.

Metti l'iOpener sopra il pannello per circa due minuti per ammorbidire l'adesivo lungo i bordi del vetro.

Può rendersi necessario riscaldare di nuovo, riapplicando l'iOpener più volte, perché il telefono sia abbastanza caldo. Segui le istruzioni dell'iOpener per evitare surriscaldamenti.

Sposta l'iOpener per scaldare la sezione rimanente del pannello per altri due minuti.

Si possono usare anche un asciugacapelli, una pistola termica o una piastra calda, ma devi stare attento non surriscaldare il telefono: sia il display OLED sia la batteria interna possono essere danneggiati dal calore eccessivo.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります