Skip to main content

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
日本語

手順 1を翻訳中

Step 1
Unplug the computer from the power supply before any maintenance or disassembly.
  • Unplug the computer from the power supply before any maintenance or disassembly.

  • Remove the two Phillips #2 head 5mm screws from the back side of the computer case. You only need to remove the screws that hold down the panel.

  • These screws can usually be removed by hand.

  • Be sure to wear an anti-static bracelet or use and anti-static mat to ensure important components are not damaged by static electricity.

2つのフィリップス #2 ヘッド 5mm ネジをパソコンケースから取り外します。

これらのネジは手でも取り外し可能です。

[* redicon_caution] Unplug the computer from the power supply before any maintenance or disassembly.
[* black
] Remove the two Phillips #2 head 5mm screws from the back side of the computer case. You only need to remove the screws that hold down the panel.
[* icon_note] These screws can usually be removed by hand.
[* icon_note] Be sure to wear an anti-static bracelet or use and anti-static mat to ensure important components are not damaged by static electricity.
[* redicon_caution] Unplug the computer from the power supply before any maintenance or disassembly.
[* black
] Remove the two Phillips #2 head 5mm screws from the back side of the computer case. You only need to remove the screws that hold down the panel.
[* icon_note] These screws can usually be removed by hand.
[* icon_note] Be sure to wear an anti-static bracelet or use and anti-static mat to ensure important components are not damaged by static electricity.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります