注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。
手順 1を翻訳中
手順1
-
Remove the two Phillips #2 head 5mm screws from the back side of the computer case. You only need to remove the screws that hold down the panel.
- | [* red] Remove the two Phillips #2 head 5mm screws from the back side of the computer case. |
---|---|
- | [* icon_note] These screws can be removed by hand. |
+ | [* icon_caution] Unplug the computer from the power supply before any maintenance or disassembly. |
+ | [* black] Remove the two Phillips #2 head 5mm screws from the back side of the computer case. You only need to remove the screws that hold down the panel. |
+ | [* icon_note] These screws can usually be removed by hand. |
+ | [* icon_note] Be sure to wear an anti-static bracelet or use an anti-static mat to ensure important components are not damaged by static electricity. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。